Stainless Steel Capillary Pipes/Tubes Manufacturers & Suppliers in India – 201 /304 /316 Capillary Pipes & Tubes

Our stainless steel capillary pipes and tubes are certified to the requirements of  ASTM A554 standard and most user specifications. Metallica manufactures stainless steel capillary tubing from the finest quality raw materials. Stainless steel capillary tubes in grade 304,304L/H,304LN, 316L are generally available in stock in size range of 0.28-10mm.

Stainless Steel Capillary Pipes & Tube Supply Range

Stainless Steel capillary tubes for medical needle:

Stainless Steel Capillary Tubing is generally used for structural purposes and applications that range from aesthetic to highly functional

Chemical Composition for Stainless Steel Capillary Pipes & Tubes

Mechanical Properties for Stainless Steel Capillary Pipes & Tubes

Quality Tests for Stainless Steel Capillary Pipes & Tubes

From the receipt of raw materials to the final inspection of the finished products – we do everything we can to ensure our customers receive only the very best quality. Of course, all tubes of a non-destructive and / or destructive testing may be subjected. We have the HP-0 approval by the TÜV and also meet many other quality requirements. Final Inspection:- IGC Test Dimensions Surface, Physical Testing, Grade Check, Product Analysis, Hardness Test, Bend Test, Chemical And Mechanical Analysis, Pitting Resistance Test, Intergranular Corrosion Test, Water Pressure, Crack Detector.

Heat Treatment (Annealing) for Stainless Steel Capillary Pipes & Tubes

304/304L is not hardenable by heat treatment. Cold working increases tensile strength and hardness. Annealing range is between 1850° and 2050°F. Cool rapidly. Water should be used for heavier sections; air for lighter sections. The stress relieving range is between 400° and 750°F

Surface Finishes for Stainless Steel Capillary Pipes & Tubes

Seamless, Welded, Brushed, Pickled, Solution Annealed and Pickled up to O.D. 219.1mm, Polished Grit 120 – 600, Mirror Polished. Other finishes available upon request.

Flattening Test for Stainless Steel Capillary Pipes & Tubes

For material heat treated in a continuous furnace flattening tests shall be made on a sufficient number of pipes to constitute 5 % of the lot, but in no case less than 2 lengths of pipe.

Markings for Stainless Steel Capillary Pipes & Tubes

Bright annealed tubing is line–stenciled with OD, wall, ASTM specifications, size, grade, heat number, production date and time. OD polished tube is marked on one end of each tube with a removable label stating ASTM specification, manufacturer, grade and heat number. Continuous line stencil available on request.

Different wall thickness, materials and surfaces as well as lengths can be produced on inquiry.

Stainless Steel Capillary Tubes, Seamless Capillary Tube, Welded Capillary Tubes Ex- Stock

Note:

• Mill test certificates will be issued according to EN 10204/3.1B
• All tubes shall be supplied as per applicable ASTM A554 Specification.